BKHWD - CW-0410 POLY PLASTIC SATIN URETHANE
- MSDS: BKHWD
- Manufacturer: VOGEL PAINT AND WAX CO INC
- Product Name: CW-0410 POLY PLASTIC SATIN URETHANE
- National Stock Number: 8010-01-078-7777
Product Identification
Product ID:CW-0410 POLY PLASTIC SATIN URETHANE
MSDS Date:03/16/1988
FSC:8010
NIIN:01-078-7777
MSDS Number: BKHWD
Responsible Party
ORANGE CITY, IA 51041
Emergency Phone: (712) 737-4993
Info Phone: (712) 737-4993
Cage: 0DSM4
Contractor
Telephone: (712) 737-4993
Cage: 0DSM4
Ingredients
AROMATIC PETROLEUM DISTILLATE, HEAVY STRAIGHT RUN NAPHTHA
CAS: 64741-41-9
Fraction By Weight: 40%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
PROPYLENEGLYCOL MONOMETHYL ETHER ACETATE,
CAS: 108-65-6
RTECS: AI8925000
Fraction By Weight: <5%
ACGIH TLV: 100 PPM
KEROSENE, KEROSINE
CAS: 8008-20-6
RTECS: OA5500000
Fraction By Weight: <5%
ACGIH TLV: 500 PPM
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: RESPIRATORY IRRITATION,
HARMFUL, FATAL, DAMAGE TO LUNGS & SPLEEN, & PERMANENT DAMAGE TO
BRAIN & CENTRAL NERVOUS SYSTEMS. SKIN: DAMAGE. EYES: DAMAGE &
IRRITATION. INGESTION: DAMAGE TO LIVER , KIDNEYS, GASTROINTESTINAL
TRACT, & BLOOD.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: RESPIRATORY IRRITATION, HARMFUL,
FATAL, DAMAGE TO LUNGS & SPLEEN, & PERMANENT DAMAGE TO BRAIN &
NERVOUS SYSTEMS. INGESTION: DAMAGE TO GASTROINTESTINAL TRACT,
KIDNEYS, LIVER, & BLOOD. SKIN: DAMAGE. EYES: DAMAGE & IRRITATION.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. EYES:
FLUSH W/LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINS. SKIN: WIPE OFF
W/TOWEL. REMOVE REMAINDER W/MINERAL SPIRITS, TURPENTINE, OR LACQUER
THINNE R. WASH W/SOAP & WATER. INGESTION: OBTAIN MEDICAL ATTENTION
IN ALL CASES.
Fire Fighting
Flash Point:102F
Lower Limits:0.7%
Extinguishing Media:CO2, DRY CHEMICAL, OR FIRE FOAM
Fire Fighting Procedures:WATER IS UNSUITABLE, BUT MAY BE USED TO COOL
CLOSED CONTAINERS. WEAR SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:COMBUSTIBLE LIQUID.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE
AREA. USE NON-SPARKING TOOLS. REMOVE W/INERT ABSORBENT.
Handling
Handling and Storage Precautions:DON'T STORE NEAR HEAT, SPARKS, OR
FLAME. AVOID BURNING, WELDING, & CONTACT W/FIRE. AVOID PROLONGED
CONTACT W/SKIN & INHALATION OF VAPORS.
Exposure Controls
Respiratory Protection:IN CONFINED AREAS OF POOR VENTILATION, USE
CHEMICAL CARTRIDGE RESPIRATOR OR SELF-CONTAINED BREATHING
APPARATUS.
Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST VENTILATION IN
VOLUME & PATTERN TO KEEP
Eye Protection:SAFETY GLASSES/GOGGLES IF SPLASHING
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:311-500F
Vapor Pres:2
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:56.93%
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, SPARKS, FLAME, HOT SURFACES, SOURCES
OF IGNITION, ELECTRICAL/STATIC/FRICTIONAL SPARKS, & FIRE
Hazardous Decomposition Products:CO
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. COMBUSTIBLE LIQUID.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.